ACC-CBL-1 $10.00
Approximately 2 meter, 6 wire cable with RJ-11
terminators.
ACC-CBL-2 $20.00
The new Cable 2 provides a rugged and
reliable way to connect your Hand-held to a PC. With molded DB 9 terminators Cable 2
replaces the older Adapter 5 to Cable 1 to Adapter 5 connection.
Supported Model(s):
ACC-POWERBAT-12-G2
Description: Cable which supplies power from the ACC-POWERBAT-12-G2 to the HP-GPS-L4
receiver or to the GPS-BEAC-PKG Coast Guard Beacon Receiver. This cable is included with
the HP-GPS-L4 packages and with the GPS-BEAC-PKG.
ACC-CBL-A3P $10.00
Supported Model(s): Two ACC-POWERBAT-12-G2
batteries
Description: Parallel cable which supplies power from (2) ACC-POWERBAT-12-G2 batteries to
the HP-GPS-L4 GPS receiver. This cable is included with the HP-GPS-L4 packages.
ACC-CBL-T1 $10.00
Supported
Model(s): Multiple ACC-POWERBAT-12-G2 batteries
Description: Cable for charging up to three
ACC-POWERBAT-12-G2 batteries using a single ACC-RE12B and ACC-CBL-PWR. This cable is
included with the HP-GPS-L4 packages.
ACC-CBL-B1 $45.00
Supported Model(s): HP-GPS-L4
Description: Cable for connecting the HP-GPS-L4 GPS receiver to an RTCM-104 data source
such as the Coast Guard Beacon Receiver (Part No. GPS-BEAC-PKG). The ACC-CBL-B1 connects
to the HP-GPS-L4 GPS receiver and provides (2) 9-pin terminations: (1) male and (1)
female. The female termination connects to the PC5L data collector provided with the
HP-GPS-L4 packages. The male termination connects to the RTCM-104 data source.
Alternatively, the ACC-CBL-B1 can also output NMEA data through the 9-pin male
termination.